Automatic Steel Sheet Slitting Machine

Automatic steel sheet slitting machine meets JIS standards and contains 17 machines including the recoiler include spacers coil car for recoiler electric system, hydraulic unit, pneumatic unit, safety fence and more related equipment.

• Coil cart for uncoiler.
• Single side / double side uncoiler (support arm stand for single side uncoiler).
• Leveling / Leveling + Shearing stand.
• Loop brideg.
• Side guide stand.
• Single slitting knife double slitting knife stand.
• Loop bridge and scrap winder.
• Tension and stand.
• Recoiler.

• By means of Programmable Logic Controller (PLC), system performance is based upon the characteristics of various metal sheets, and switches high ow speed operating mode automatically so as to achieve improved efficiency and reduced maintenance dramatically.
• For lower malfunctioning, the material uncoiler uses an expand shrink hydraulic cylinder that is mounted on an integrated steel frame.
• The material uncoiler is equipped with a high efficiency disc type brake; its tension is adjusted by the air pressure loop.
• Under this circumstance, the time for tension adjustment is reduce, also, the forced monetary braking is occurred thus free from loosen of coil.
• The pre is equipped with DC Various Speed motor drive, so that a synchronized speed cooperate to the production line could be governed.
• Slitting knives are mounted on integrated frame with a separated 1 transmission that means enhanced rigidity structure of Machine, lower vibration amplitude of knives, and excellent yields could be produced.
• The datum plane and accuracy of sitting knives axes are all to be fabricated within 0.006mm in tolerance, so that makes higher duration of slitting knives and much excellent, accuracy of outputs of the slitting line.
• For securing the stability of slitting line during operation, the tension controlled roll up device with slip differential structure is designed for the water.
• The tension pad uses high elastics and resistive carpet as surface materials, so keep the outputs of the Line smoother. In addition, it also equipped a pressure-balance device to keep an even-pressure over the both side of materials that toched with the tightener.
• The recoiler is equipped with an improved / high rigid holder, that causes reduce of lead time a hydraulic pressure adjustable back - pressure device is equipped on the separator mechanism, so that a constant hold pressure could be reached for rec oil.
• Self-tension design enables to retain a better tightness during rec oil.

Model	Steel Sheet Thick.(mm)	Steel Sheet Width(mm)	Slitting Stards	Coil Weight (Ton Max.)	Space Required (M3)	Slitting Speed (Max.)	Power (HP)
AP-160	0.5-2.0	600-1250	10-25	15	25*8*2.5	120m/min	220
AP-180	0.5-3.2	600-1250	12-25	15	27*8*3.0	120m/min	225
AP-220	1.0-4.0	600-1550	06-25	25	31*9*3.0	100m/min	265
AP-250	1.2-6.0	600-1550	04-25	25	31*10*3.0	100m/min	360
AP-280	3.0-9.0	600-1550	04-25	25	34*10*3.0	70m/min	650